Puffing Billy line Cockatoo Station 1/48 O scale Kit


Laser cut kit of Cockatoo station

The kit comes complete with north and south platforms with a lamp room.

The foot print of the station

The Main station building is 803mm x 164mm

The north platform with Lamp room is 712 x 95mm

The southern Platform is 821 x 57mm

Cockatoo Station is situated on the Puffing Billy in the town of  Cockatoo. It opened with the line on 18 December 1900 as Devon, but was renamed Cockatoo Creek on 29 July 1901 and subsequently shortened to Cockatoo in 1904. There was originally a platform road and a loop siding, but a crossing loop was later added in between the two. A single 12ft by 20 ft timber portable station building was provided which was later extended. Other associated buildings such as toilets and a van good shed were also on the platform while a weatherboard goods shed was provided on the loop siding (No. 3 Road).

Today, the loop siding has been provided again along with the platform track, but the crossing loop is yet to be rebuilt. A platform exists which initially had a temporary non-heritage building provided for safe working purposes only, but during 2007 a heritage type building, obtained second-hand from another Victorian station, was relocated to Cockatoo. Although it is not representative of the original building, it nevertheless is a typical building of the day and now provides a more suitable safe working office than the non-heritage building previously used for this purpose, which was subsequently removed in 2009. Whilst trains normally stop at Cockatoo, very few passengers join or alight.


Puffing Billy line Cockatoo Station 1/48 O scale Kit

Additional information

Weight 3000 g
Dimensions 86 × 46 × 6 cm

About the author

Owner of Model Train Buildings since 2013

Leave a Reply