Ho Scale NSWGR Tenterfield barracks


As seen at the Heritage listed Tenterfield Train Station complex 
The kit has finely detailed brickwork, and lots of great details.
 215mm long x 117mm wide 
The building is the former engine driver’s residence and was constructed out of brick. It has a gable roof with smaller cross gables facing the front and rear. There are verandahs with simple timber posts along both sides. The original layout comprised four individual bedrooms in a back-to-back arrangement, each facing onto a verandah, with doors and windows opening onto it. A narrow combined toilet/ washroom/ bathroom extended across the width of the building with access from each of the verandahs. There was a larger meal room and a kitchen both with access from either of the verandahs.
The quality of the laser cut pieces makes this an excellent kit, with little need to trim or sand components making it so easy to assemble and adds greatly to the quality of the finished model.
This is an UNPAINTED Laser cut wood kit in HO 1/87 Scale 
The base board, fencing and trees are not included.
All kits include step by step building instructions and are designed to be easy to put together 
Alleene’s Tacky Glue, PVA glue, any kind of wood glue or thick super glue is suitable to use to assemble these kits

Additional information

Weight 400 g
Dimensions 28 × 18 × 3 cm

About the author

Owner of Model Train Buildings since 2013

Leave a Reply